Tabletop Hot Wire Foam Cutter, 72W Multifunctional Hot Foam Cutting Machine Foam Cutter Hot Wire Cutter for Cutting Foams Sponge

Specification Material: Multilayer Board, Stainless Steel, Aluminum AlloyColor: Light Blue, SilverMount Type: CountertopAssembly Required: YesPlug Type: US StandardPower Supply: Corded ElectricAdapter Input: 100-240VVoltage: 18V Power: 72WPreheating Time: 0-5 SecondsCutting Height: 0-25cm/0-9.84 inCutting Width: 0-28cm/0-11.02inCutting Diameter: 0-10cm/0-3.94inAdjustable Bracket Angle Range: 0-180°Power Cord Length: 222.5cm/87.6inHeating Wire Diameter: 0.28mm/0.01inAdjustable Temperature Range: 0~300℃/32~572℉Workboard Size: 39*33cm/15.35*12.99inPackage Size: 44.5*11.5*39cm/17.52*4.53*15.35Gross Weight: 3.3kg/7.27 lbsNet Weight: 3kg/6.61 lbsPackage Included1* Foam Cutting Machine1* Power Adapter1* English ManualOther Accessories for AssemblyNotes1. Please read the manual completely before installation and use.2. Please do not touch the heating wire of the cutting machine when the power is on. Please keep a certain distance from the heating wire. If necessary, wear gloves to avoid scalding. The heating wire should not be too red, otherwise, it is easy to break, and the life of the adapter will be affected.3. Please use the product in a ventilated environment. It is not advisable to allow small children to play with this machine.4. Please turn off the power when the product is not in use. Long-time idle burning may cause damage to the machine5. Please note that it is not suitable for fireproofing materials. When cutting, the cutting wire temperature is high, and attention should be paid to keeping away from flammable and explosive products.6. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.

• 【High Efficiency】Hot wire foam cutter adopts electric heating wire cutting, which can heat the electric heating wire to the required temperature in about 0-5 seconds, thus cutting the foam quickly and smoothly and improving the working efficiency. And foam cutter tool is made of high-quality multi-layer board and stainless steel column, wear-resistant and rust-proof, can be used for a long time.
• 【Precise Cutting】The worktable is carefully designed with scales on all four sides to accurately measure each piece of material, and the 0.01” heating wire is designed to allow for more precise cutting, less error, and a lower loss rate. In addition, hot foam cutter can be used to cut foam, sponge, pearl cotton, ribbon, KT boards and so on. It can cut angular, cylindrical, pointed cone, ring, taper, straight line and other shapes.
• 【Adjustable Design】You can adjust the desired temperature between 32℉ and 572℉ by rotating the voltage adjustment knob of the adapter. The cutting height, width and cutting circle radius are also adjustable, allowing you to achieve precise cutting results.
• 【Enjoy DIY】By adjusting the angle of the stand, you can change the position of the wire to cut different shapes of materials, and you can easily get various irregular shapes such as conical, square, cylindrical, etc. to fully enjoy the fun of DIY.
• 【Simple Operation】Foam wire cutter is easy to operate, and the size of the working board is 15.35*12.99 inches, which is suitable for beginners and professionals to use easily. In addition, hot wire for cutting styrofoam has a simple structure and complete accessories, allowing you to quickly assemble and start using it. The small size (15.35*12.99 inches) won't take up too much desktop.