Fuse Box Power Cable for GAIGIT Dash Cams,Upgrade Parking Mod

Purpose of This Wiring Harness This wiring harness enables your dashcam to activate parking monitoring mode. Once connected, you must also turn on the parking monitoring feature in the dashcam’s app. Please note that this mode is disabled by default.

• [Definition of the three wires of GATGIT Fuse box power cable]Black Wire (GND/B-): Usually Fixed on a metal screw, connects to the vehicle's body. Red Wire (ACC): Provides power only when the vehicle's ignition is turned on. Yellow Wire (VCC/B+): Provides constant power, whether the ignition is turned on or not.
• [Upgrade with Parking Mode] The dash cam offers two parking modes: "Time-lapse video recording" and "Parking monitoring collision detection" . Only one mode can be active at a time; they cannot be enabled simultaneously. To use either feature, please download the Viidure app and enable your selected mode through its settings.
• [Time-lapse video recording] This function captures one image per second and compiles them into a video. By default, this feature is disabled. To enable it, please use the Viidure app. Please note that this function is designed to operate continuously for up to 48 hours to prevent excessive drain on your vehicle's battery, which could otherwise result in difficulty starting the engine. The recording timer resets each time the engine is started.
• [Parking monitoring collision detection] Whenever the dash cam detects a collision, it will power on and start recording automatically for 1 minute. By default, this feature is disabled. To enable it, please use the FUVYMYT or Viidure app.
• [Fuse Box Power Adapter]We prepare 4 sets of cables to fit all the modes. There is always a set of cables that is suitable for your car.The interface of the SM is for connecting dash cam.