ERV-YU Electronic Star Time Relay(110VAC 24VDC)

RelaysGeneralERV-YU Star Relay is designed to controll three phase motors in the start.Usage and Working PrincipleMake connections according to the diagram.You can set working time between 1-30sec.When power is on, star relay output and star relay LED on. Device waits for aoutputdjusted star working time and waits for adjusted time(1msec-500msec). In this position, there is no output contact and star relay led switches off. After waiting time relay output and relay LED on. Till power is off, device keeps same.MaintenanceSwitch off the device and release from connections. Clean the trunk of device with a swab. Don't use any conductor or chemicalmight damage the device. Make sure device works after cleaningWarningsPlease use the device according to the manual.Don't use the device in wet.Include a switch and circuit breaker in the assembly.Put the switch and circuit breaker nearby the device, operator can easily.Mark the switch and circuit breaker as releasing connection for device.SpecificationsOperating Voltage(Un)....: 150V-260V AC/24VDC or 110VAC/24VDCOperating Frequency.......: 50/60 Hz.<;4VAOperating Temperature..: -20°C.....+55°CWorking(star).....................: 0.1sec. - 30sec.Working(Off).....................:1msec. - 500msec.Display:................................: On led, star led and led.Connection Type..............: Terminal connectionWeight................................: Max.110gr.Contact...............................:5A/250V AC (Resistive Load)Mounting...........................: Vertical assembled in the panel or assembled on the din rail<;2000meterCable Diameter.................: 2,5mm²Working MechanismConnection diagramC1=Main ContactorC2=Star ContactorC3= ContactorDimensions

• Relays
• ERV-YU Electronic Star Time Relay