Bearing Puller No Damage to Bearing Puller Kit 36-in-1 Wheel Bearing Removal Tool Gear Puller Set with 3 Jaw Puller Set Bearing Separator Blind Hole Bearing Puller Set

Our bearing puller kit is powerful, when you still have a headache due to the inability to hold the bearings with conventional tools, our bearing puller can firmly grasp the bearings from the inside or the outside, i.e., the bearings can be disassembled by the equipped puller collet or 3 jaw puller. During the entire extraction process,the bearing puller applies uniform force,minimizing the risk of damage to the bearing and housing

• 【Widely Used - Suitable for 18 Bearing Models】Bearing puller can easily disassemble various mechanical equipment, which can be used for automobile repair, non-motor vehicle bearings, mechanical bearings, agricultural machinery, etc., and can also disassemble gears and bushings. Equipped with 6 different sizes of pulling collets to adapt to various bearing shapes and sizes,the applicable bearing models are:6005/6006/6007/6008/6009/6010/6205/6206/6207/6208/6209/6210/6305/6306/6307/6308/6309/6310
• 【Thoughtful Design - No Damage to Parts】The top of the screw ejector included in the bearing puller kit adopts a round ball design, which does not damage parts and can better protect the bearing. In addition, the puller rod is equipped with a high-strength shock-absorbing spring, which can reduce the impact during the extraction process, thereby effectively protecting the bearing.
• 【Well Made & Strong Forged Structure】Bearing puller kit is made of high-quality steel materials, such as high-hardness red steel and alloy steel,but also has been forged at high temperature for high hardness, good toughness, and not easy to bend and break. The surface of the three-jaw puller is coated with a black oxide coating, which has good corrosion resistance, making it convenient for you to remove more bearings of different specifications
• 【Easy to Use】 (1) First, pry open the bearing protection frame. (2) Then select the puller collets and insert it into the bearing gap to confirm the appropriate model. (3) Then assemble the puller collets and rod. (4) Install the screw ejector and the assembled rod on the multi-function plate and tighten the nut to complete the installation. (5) Finally, align the top of the screw ejector with the axis and rotate the ejector to remove the bearing